#Life smart sauna manual manual

In 1965, a Japanese doctor patented the first far infrared heater. However, the technology was still new at the time and research was still being done.

Infrared therapy has been around for centuries, initially introduced in the 1800s as a “light bath”. Whether you just purchased your infrared sauna or are still shopping for one, it’s good to know the best use an infrared sauna. Please contact our support team for further instructions. If you get an error code on your sauna control panel, there may be a technical issue with your connection.The bench heater is designed to heat separately and at a lower temperature than the other heaters for your comfort. If your sauna bench heater feels like it’s not heating properly, switch it off and then back on.If you place the sauna on a patio or outdoor space, the surrounding temperature may slow the internal heating of the sauna, particularly if it’s colder outside. Allow 20-60 minutes for your sauna to reach the desired temperature, depending on where you place your sauna.Do NOT use a power strip to plug in your sauna, rather plug it directly into your wall receptacle.Plug both the female end of the AC power cord and the floor power cord into the sauna power supply on the front panel, not into the floor of the sauna Make sure your power cords are properly connected.Be sure the vent on your sauna roof is closed.If you purchased a Therapy Lounge or Elevated Health model, it requires a heftier power source, and you’ll need 230v to properly run your sauna. If you have an Essential, Enrich, Inspire or Renew series model, your sauna requires a standard 120v outlet.

#Life smart sauna manual manual

Check your owner’s manual for your particular model’s electrical requirement.

However, to be sure your sauna is heating correctly, please see the checklist below: This is warmer than the recommended sauna session temperature for the average person who requires 120☏ -145☏. Your Health Mate sauna is designed to reach a maximum temperature of 160☏-170☏.